WAVE Dry series scroll vacuum pump is a completely oil-free and clean vacuum pump. It adopts the most advanced bellows isolation structure in the world to completely isolate the compression chamber and the bearing. It also uses fewer bearings to make the pump quieter and more reliable. At the same time, it can extract non-corrosive organic solvents and has stronger water vapor processing capacity. The WAVE Dry scroll vacuum pump is equipped with an independent controller, which makes the pump more intelligent, and can realize the operation of speed regulation, current limiting, and voltage stabilization of the pump according to the end user’s process. Due to the scroll compression and tip seal structure, the pump is not suitable for pumping flammable, explosive, highly corrosive and practicle-containing applications.
Gas entres scroll set
Gas is displaced and..
compressed toward center hub
Gas exhausted at center hub
Data | Model | WDry10 | WDry15 | WDry36 |
---|---|---|---|---|
Displacement | m2/h | 12.2 | 16.0 | 36.0 |
Ultimate Vacuum | mbar | 0.007 | 0.007 | 0.009 |
Motor POwer | W | 400 | 400 | 1200 |
Voltage Input | V | 220-240 | 220-240 | 220-240 |
Noise Level | db(A) | 53 | 53 | 56 |
Inlet/outlet flange | - | KF25/KF25 | KF25/KF25 | KF40/KF25 |
Mix Water Vapour | g/hr | 136 | 268 | 270 |
Lead Rate | mbar-I/s | <1x10 | ||
Dimension(LxWxH) | mm | 438x260x300 | 517x325x358 | |
Weight | Kgs | 26 | 27 | 47 |
Cooling | - | air-cooled | ||
Operating temprature | °C | 0-40 | ||
Hz | 50/60 | 50/60 | 50/60 | 50/60 |
The smallest of our Scroll pumps with 10m3 pumping speed is ideal for your smaller laboratory machines, for freeze drying but also suitable for any other dry or wet procedure. Our pumps are suitable for all types and brands of freeze dryers and other applications as well.
(net plus VAT)
The WAVE Dry15 is the entry level for freeze drying and industrial solutions, with 15m3 of pumping speed. Our pumps are suitable for all types and brands of freeze dryers and other applications as well.
(net plus VAT)
The Wave WDry 36 is our most popular model, it is the best choice for almost all of our smaller freeze dryers the FD260 and FD440, and will help to obtain the best drying results with very little service effort. The seals needs to be change about every 12 to 24 months. Its also suitable for any other vacuum-related application, dry or with water up to 400 grammes per hour. Our pumps are suitable for all types and brands of freeze dryers and other applications as well.
(net plus VAT)
Let us know any of your questions or comments about our products and services. We get back to you soon as possible.
Let us know your mail ID so we can keep you in update about our new products & services.
Wave representative USA
Wave drying systems USA
[email protected]
805 Ranch View Rd
Santa Cruz
CA 95064
USA (530) 617-1399
WAVE Trockensysteme GmbH
[email protected]
Stiegengasse 11, 1060 Vienna, Austria. ATU76131758
ATEOS1000109135
FN544278i
Wave representative India
Wave India
A2 Block B
Rajdeep Apartment
Soubhagyar Nagar
Bhubaneshwar, Odisha
India
+919741282047
[email protected]
Wave representative Spain, Portugal and UAE
3D Essence Food S.L.
[email protected]
+34620750094
Wave representative Hungary
Labnet Hungary Kft.
9700 Szombathely, Szent István király u. 83/A I/7
Hungary
+36303081746
[email protected]